- - IEEE 802.3af/at PoE compliant to simplify deployment and installation
- - Supports port-based VLAN
- - Connection distance of up to 250m at 10Mbps data rate
- - Auto-detection and protection of non-standard PoE devices
- - IEEE 802.3x Flow Control protects against lost packets for reliable data transmission
- - Total PoE power budget: 65W, up to 30W per port
4 x 10/100 RJ-45 PoE, 1 x 10/100 RJ-45 Uplink, 1Gbps, 1K MAC, 0.72M/pps, 450 g
The LevelOne FEP-0531 is a Fast Ethernet PoE switch with a total of 5 ports, one of which is available as uplink port and 4 ports for Power over Ethernet. Per PoE port a power supply of up to 30W is possible. The total PoE power budget is 60W. Distances up to 250m at 10Mbps is supported. It is an ideal solution when office and home users use a combination of PoE and non-PoE devices.
The FEP-0531 four PoE-enabled ports make it the ideal solution for office users using PoE-enabled devices in the workplace. This can include a mix of PoE IP phones, PoE Wifi APs and PoE IP cams. It is the perfect solution for offices that want to upgrade their office equipment and LAN infrastructure to PoE capability or upgrade with Gigabit performance. The switch automatically detects the connected IEEE 802.3at/af standard device and provides these devices with power and data over a single cable.
In addition, the FEP-0531 enables users to provide a stable and reliable high-speed LAN environment with store-and-forward switching architecture, packet error filtering and blockage-free packet forwarding. The 802.3x flow control mechanisms operate in both full and half duplex modes. This device supports the N-Way Auto Negotiation protocol, which automatically detects network speed and duplex mode.
For instant fault detection, the FEP-0531 is equipped with a full range of LEDs to help monitor and troubleshoot the network.
LevelOne FEP-0531, Fast Ethernet (10/100), Full duplex, Power over Ethernet (PoE) Support
LevelOne FEP-0531. Basic switching RJ-45 Ethernet ports type: Fast Ethernet (10/100), Basic switching RJ-45 Ethernet ports quantity: 4, Console port: RJ-45. Full duplex. MAC address table: 1000 entries, Switching capacity: 1 Gbit/s. Network standard: IEEE 802.3, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u, IEEE 802.3x. Power over Ethernet (PoE) Support
