- Brand : Tripp Lite
- Product name : 2.9kW 120V Single-Phase ATS/Monitored PDU - 24 5-15/20R & 1 L5-30R Outlets, Dual L5-30P Inputs, 10 ft. Cords, 2U, TAA
- Article code : PDUMNH30AT2
- GTIN (EAN/UPC) : 0037332261427
- Category : Power Distribution Units (PDUs)
- Data-sheet quality : created/standardized by Icecat
- Product views : 34509
- Info modified on : 11 Aug 2024 05:47:30
- Product Brochure/Datasheet (0.2 MB)
-
Bullet Points Tripp Lite PDUMNH30AT2 power distribution unit (PDU) 25 AC outlet(s) 2U Black
:
- - Built-in HTML5-based LX Platform interface allows you 24/7 remote access
- - Enables redundant A/B power option for single-corded network devices
- - Digital meter for real-time voltage, amp and load monitoring helps prevent overloads
- - Dual 10 ft. cords with NEMA L5-30P inputs connect to separate power sources
- - Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases
- Guarantee: : 2-year limited warranty
-
Long product name Tripp Lite PDUMNH30AT2 power distribution unit (PDU) 25 AC outlet(s) 2U Black
:
2.9kW 120V Single-Phase ATS/Monitored PDU - 24 5-15/20R & 1 L5-30R Outlets, Dual L5-30P Inputs, 10 ft. Cords, 2U, TAA
-
Tripp Lite PDUMNH30AT2 power distribution unit (PDU) 25 AC outlet(s) 2U Black
:
ATS PDU allows real-time current metering and remote power monitoring to help prevent circuit overloads and ensure proper load balance.
Single-Phase 30A ATS PDU Distributes and Monitors Network-Grade Power in Real Time
This monitored PDU provides real-time remote monitoring of voltage, frequency and load levels via its built-in network interface. Ideal for network IT applications, small computer rooms and other equipment rack applications, the PDUMNH30AT2 features 24 NEMA 5-15/20R 120V outlets and one NEMA L5-30R outlet, which distribute AC power to rack equipment. Dual 10-foot (3.1-meter) power cords with NEMA L5-30P inputs connect to separate primary and secondary mains circuits, backup generators, UPS systems or utility power grids, including out-of-phase sources.
Switches from Primary to Secondary Power Source in Milliseconds
Dynamic solid-state automatic transfer switching (ATS) allows the PDU to switch to the secondary source within 1–5 milliseconds, should the primary source fail or become unstable, to ensure your connected equipment operates without interruption. An on-board ATS processor constantly evaluates the power quality of both input sources. It prevents switching if the secondary source is unavailable or of lower quality than the primary source.
Built-In LX Platform Network Management Card Allows Remote Access 24/7
The HTML5-based WEBCARDLX network interface enables full remote access for PDU status monitoring and email notifications via secure web browser, SNMP, telnet or SSH. The latest version of PowerAlert Device Manager (PADM20) provides enhanced remote management capabilities, including customizable dashboard graphs to fit user preferences. The PADM20 upgrade and Tripp Lite’s PowerAlert Element Manager (PAEM) form a powerful tool for expanding maintenance functions in large installations, including firmware update checks and backup and restoration of device configurations.
Digital LED Display and Load Meter Helps Prevent Potentially Expensive Overloads
A three-digit LED display shows measured or calculated amperage, kilowatt and voltage values at a glance. Monitoring amperage helps ensure load levels remain well below maximum capacity with no danger of overload that could lead to costly downtime or damaged equipment. Maintaining proper load levels, even while adding new equipment, can keep your TCO (total cost of ownership) low. Monitoring current provides 1% billing grade accuracy.
Mounts into 2U of Rack Space or on a Wall
Use the included mounting hardware to install the all-metal housing into 2U of space in an EIA-standard 19-inch rack. You may also use the mounting brackets to secure the PDU to a wall or under a counter. Included cord retention brackets help organize connected power cords and eliminate cable clutter.
TAA-Compliant for GSA Schedule Purchases
The PDUMNH30AT2 is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts. -
Short summary description Tripp Lite PDUMNH30AT2 power distribution unit (PDU) 25 AC outlet(s) 2U Black
:
Tripp Lite PDUMNH30AT2, Monitored, Switched, 2U, Single-phase, Horizontal, Metal, Black
-
Long summary description Tripp Lite PDUMNH30AT2 power distribution unit (PDU) 25 AC outlet(s) 2U Black
:
Tripp Lite PDUMNH30AT2. PDU types: Monitored, Switched, Rack capacity: 2U, Type: Single-phase. AC outlets quantity: 25 AC outlet(s), AC outlet types: NEMA 5–20R, NEMA L5-30R, Power plug: NEMA L5-30P. Cable length: 120.1" (3.05 m). Nominal input voltage: 120 V, Maximum current: 30 A, AC input frequency: 50 - 60 Hz. Width: 17.3" (439.9 mm), Depth: 11.9" (302 mm), Height: 3.41" (86.6 mm)
Design | |
---|---|
PDU types | Monitored, Switched |
Type | Single-phase |
Rack capacity | 2U |
Mounting | Horizontal |
Housing material | Metal |
Product color | Black |
Display | LCD |
Ports & interfaces | |
---|---|
AC outlets quantity | 25 AC outlet(s) |
Power plug | NEMA L5-30P |
AC outlet types | NEMA 5–20R, NEMA L5-30R |
Serial ports quantity | 1 |
Ethernet LAN (RJ-45) ports | 1 |
USB ports quantity | 1 |
Features | |
---|---|
LED indicators | |
Cable length | 120.1" (3.05 m) |
Power | |
---|---|
Nominal input voltage | 120 V |
AC input frequency | 50 - 60 Hz |
Maximum current | 30 A |
Nominal output voltage | 100 - 127 V |
Maximum power | 3050 W |
Circuit breaker |
Weight & dimensions | |
---|---|
Width | 17.3" (439.9 mm) |
Weight & dimensions | |
---|---|
Depth | 11.9" (302 mm) |
Height | 3.41" (86.6 mm) |
Weight | 13.7 lbs (6.22 kg) |
Packaging data | |
---|---|
Package weight | 18 lbs (8.16 kg) |
Package width | 16.6" (421.6 mm) |
Package depth | 19.9" (505.5 mm) |
Package height | 7.7" (195.6 mm) |
Packaging content | |
---|---|
Cables included | USB Type-A to Micro-USB Type-B |
Manual | |
Rack mount kit |
Operational conditions | |
---|---|
Operating temperature (T-T) | 0 - 40 °C |
Storage temperature (T-T) | -30 - 50 °C |
Operating relative humidity (H-H) | 5 - 95% |
Operating altitude | 0 - 118110.2" (0 - 3000 m) |
Non-operating altitude | 0 - 393700.8" (0 - 10000 m) |
Operating temperature (T-T) | 32 - 104 °F |
Technical details | |
---|---|
Sustainability compliance | |
Compliance certificates | Federal Communications Commission (FCC), RoHS |
Logistics data | |
---|---|
Country of origin | Taiwan |
Quantity per master (outer) case | 1 pc(s) |
Country | Distributor |
---|---|
|
1 distributor(s) |