- Brand : Tripp Lite
- Product name : B127M-101-H HDMI over Cat6 Extender Kit for Medical Environments, 4K @ 60 Hz, HDR, 4:4:4, PoC, 230 ft., TAA
- Product code : B127M-101-H
- GTIN (EAN/UPC) : 0037332262677
- Category : AV Extenders
- Data-sheet quality : created/standardized by Icecat
- Product views : 53881
- Info modified on : 11 Aug 2024 06:05:20
- Product Brochure/Datasheet (0.1 MB)
-
Bullet Points Tripp Lite B127M-101-H HDMI over Cat6 Extender Kit for Medical Environments, 4K @ 60 Hz, HDR, 4:4:4, PoC, 230 ft., TAA
:
- - Supports 4K @ 60 Hz video resolutions (4:4:4) as specified in HDMI 2.0
- - Carries High Dynamic Range (HDR) signals for rich contrast and expanded color accuracy
- - Power over Cable (PoC) technology provides power to the receiver via Cat6 cable
- - Features EMI/RFI and ESD protection required for use in medical environments
- - Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases
- Warranty: : 1-year limited
-
Long product name Tripp Lite B127M-101-H HDMI over Cat6 Extender Kit for Medical Environments, 4K @ 60 Hz, HDR, 4:4:4, PoC, 230 ft., TAA
:
HDMI over Cat6 Extender Kit for Medical Environments, 4K @ 60 Hz, HDR, 4:4:4, PoC, 230 ft., TAA
-
Tripp Lite B127M-101-H HDMI over Cat6 Extender Kit for Medical Environments, 4K @ 60 Hz, HDR, 4:4:4, PoC, 230 ft., TAA
:
All-in-One HDMI Extender Kit Ideal for Medical Environments
This complete transmitter and receiver system is recommended for transmitting 4K video for medical applications in hospitals, clinics, physicians’ offices and other medical environments where the source and display are farther apart than conventional A/V cables allow. The extender kit conforms to strict EMI/RFI and ESD requirements.
Extends a 4K A/V Transmission Up to 230 ft.
The B127M-101-H extends 4K signals from an HDMI source device to an HDMI display up to 230 feet (70 meters) away via user-supplied Cat6 cabling.
Transmits Crystal-Clear 4K Video with Multi-Channel Audio
The HDCP 2.2-compliant B127M-101-H supports Ultra HD resolutions up to 3840 x 2160 (4K x 2K) at 60 Hz, as specified by HDMI 2.0, with 36-bit Deep Color, 4:4:4 chroma subsampling and full, rich uncompressed DTS-HD, Dolby TrueHD and 7.1-channel digital audio. High Dynamic Range (HDR) provides a wide range of vibrant colors with richer contrast, brighter whites and deeper blacks that pop on a 4K display. Built-in equalization allows you to fine-tune the image quality at the remote display.
Meets EMI/RFI and ESD Requirements Necessary for Use in Medical Applications
The transmitter and receiver both meet CISPR 11- Group 1 Class A and IEC 61000-4-2 (ESD) Test level 4 standards for environments with strict EMI/RFI and ESD limitations. They are approved for medical applications where reducing electrical interference is vital to the proper functioning of equipment.
Local HDMI Port on Transmitter Supports 4K @ 60 Hz Resolution
To monitor the video signal being extended to the receiver, connect a 4K display to the transmitter’s local HDMI port with a user-supplied HDMI cable. This port does not support multi-resolution capabilities, so the connected monitor must also support 4K/60 Hz to function properly.
Built-In PoC Technology Provides Power to Avoid Bulky External Power Bricks
Power over Cable (PoC) technology powers the receiver over Cat6 cable. LEDs on both units will light up to indicate the system is receiving power and a signal is being transmitted. PoC lets you avoid the hassle of a bulky power brick and gives you the freedom to place the receiver where needed without worrying about finding a nearby AC outlet.
Plug-and-Play Operation for Quick Setup and Immediate Use
The included transmitter and receiver work right out of the box with no software required. Mounting hardware is included for installing both units on a wall, pole or 19-inch rack. Connect the transmitter to the source with a user-supplied HDMI cable (such as P568- or P569-Series). Then, connect the two units with user-supplied 26 AWG STP Cat6/6a patch cable (such as N262-Series). Finally, connect the receiver to the display with another user-supplied HDMI cable.
TAA-Compliant for GSA Schedule Purchases
The B127M-101-H is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts. -
Short summary description Tripp Lite B127M-101-H HDMI over Cat6 Extender Kit for Medical Environments, 4K @ 60 Hz, HDR, 4:4:4, PoC, 230 ft., TAA
:
Tripp Lite B127M-101-H HDMI over Cat6 Extender Kit for Medical Environments, 4K @ 60 Hz, HDR, 4:4:4, PoC, 230 ft., TAA, 3840 x 2160 pixels, AV transmitter & receiver, 70 m, Wired, 3D, HDCP
-
Long summary description Tripp Lite B127M-101-H HDMI over Cat6 Extender Kit for Medical Environments, 4K @ 60 Hz, HDR, 4:4:4, PoC, 230 ft., TAA
:
Tripp Lite B127M-101-H HDMI over Cat6 Extender Kit for Medical Environments, 4K @ 60 Hz, HDR, 4:4:4, PoC, 230 ft., TAA. Type: AV transmitter & receiver, Maximum resolution: 3840 x 2160 pixels, Cable types supported: Cat6, HDMI. Connectivity technology: Wired. AC input voltage: 100 - 240 V, AC input frequency: 50 - 60 Hz, Operating voltage: 24 V. Receiver dimensions (WxDxH): 115 x 62.4 x 27 mm, Receiver weight: 450 g, Transmitter dimensions (WxDxH): 115 x 62.4 x 27 mm. Package width: 260.1 mm, Package depth: 164.1 mm, Package height: 55.1 mm
Features | |
---|---|
Type | AV transmitter & receiver |
Maximum resolution | 3840 x 2160 pixels |
Cable types supported | Cat6, HDMI |
Maximum transfer distance | 70 m |
Audio system | Multichannel |
Extended display identification data (EDID) | |
Audio output channels | 7.1 channels |
Electrostatic Discharge (ESD) protection | |
Electrostatic Discharge (ESD) protection | 8 kV |
LED indicators | |
Supported video modes | 720p, 1080p, 2160p |
Supported graphics resolutions | 1280 x 720 (HD 720), 1920 x 1080 (HD 1080), 3840 x 2160 |
Cable length | 1.381 m |
HDCP | |
Material | Metal |
Colour depth | 36 bit |
3D | |
HDCP version | 1.4/2.2 |
Product colour | Black |
Ports & interfaces | |
---|---|
Connectivity technology | Wired |
Ethernet LAN | |
RJ-45 input ports | 1 |
RJ-45 output ports | 1 |
HDMI in | 1 |
Number of HDMI outputs | 2 |
HDMI version | 2.0 |
DC-in jack |
Power | |
---|---|
AC input voltage | 100 - 240 V |
AC input frequency | 50 - 60 Hz |
Operating voltage | 24 V |
Input current | 0.6 A |
Output current | 1 A |
Operational conditions | |
---|---|
Operating temperature (T-T) | 0 - 40 °C |
Storage temperature (T-T) | -15 - 50 °C |
Operating relative humidity (H-H) | 0 - 85% |
Storage relative humidity (H-H) | 0 - 85% |
Weight & dimensions | |
---|---|
Receiver dimensions (WxDxH) | 115 x 62.4 x 27 mm |
Receiver weight | 450 g |
Transmitter dimensions (WxDxH) | 115 x 62.4 x 27 mm |
Transmitter weight | 450 g |
Packaging data | |
---|---|
Package width | 260.1 mm |
Package depth | 164.1 mm |
Package height | 55.1 mm |
Package weight | 760 g |
Package type | Box |
Packaging content | |
---|---|
AC adapter included | |
Cables included | AC |
Included power plug types | AU, EU, NA, UK |
Manual | |
Mounting kit |
Technical details | |
---|---|
Country of origin | Taiwan |
Sustainability compliance | |
Compliance certificates | CE, REACH, RoHS |
Logistics data | |
---|---|
Master (outer) case width | 573 mm |
Master (outer) case length | 273 mm |
Master (outer) case height | 175 mm |
Master (outer) case gross weight | 7.9 kg |
Products per master (outer) case | 10 pc(s) |
Master (outer) case GTIN (EAN/UPC) | 10037332262674 |
Country | Distributor |
---|---|
|
3 distributor(s) |
|
2 distributor(s) |
|
3 distributor(s) |
|
1 distributor(s) |
|
1 distributor(s) |
|
1 distributor(s) |
|
1 distributor(s) |